Brakes/Levers/Pads

As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust

- Cold-forged 6061-T6 aluminum arms, available in 85mm or 108mm - Precision sealed bearing pivots, titanium and stainless steel hardware - Flexible cable noodle and streamlined cable fixing point - 35 millimeters of vertical brake pad adjustment

For Box braking we’ve limited the use of our Oversized Technology to the V area since the levers need to be minimalist and largely act as a remote for the V-Brakes. To reduce lateral deflection at the V we chose to enlarge the pivot areas and arms while tightening tolerances at their interfaces. We robbed material from unloaded sections to reinforce these zones of high stress. Not only are you going to be more efficient with brake power delivery, but you’ll also feel the instant response of deceleration. Key differences: The Box One V-Brake are the only brakes in the Box line-up to be blessed with Oversized Technology. They are also the only model to use sealed precision bearings to further reduce non-rotational movement. The 108mm long-reach brakes are excellent for BMX, mountain, city, urban and tandem bicycles using linear-pull-compatible levers. The 85-mm short reach (AKA mini-V) brakes are an excellent choice for cyclocross or drop-bar gravel bikes.

- Capable of handling the higher average speeds and increased mass of trail ready E-MTBs. - G2 R lever with a powerful 4-piston caliper derived from the gravity-focused Code brakes.

- Capable of handling the higher average speeds and increased mass of trail ready E-MTBs. - G2 R lever with a powerful 4-piston caliper derived from the gravity-focused Code brakes.

Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system. - Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss - Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power - MatchMaker compatible for a clean and simplified look - Ambidextrous lever mount design - Lightweight 4-piston dual-diameter caliper - Includes steel-backed organic pads - Front includes 950mm hose - Rear includes 1800mm hose

- Simple, robust, powerful brake for riders who prefer to work with Mineral oil. - The lever is designed with proven lever technologies and features easy adjustment access and superior ergonomic comfort. - The caliper is based on the Code downhill brake and utilizes the same pads. - Post-mount. - Designed for use with Maxima Mineral Oil only.

The SRAM Level brake levels the playing field with power and reliability stuffed into a lightweight package. This is a no-nonsense performer, but don’t let its understated disposition fool you — Level gives you the art of braking in minimalist form. - Same proven lever technologies as Guide—piston, seals, reservoir and bladder - Compact lever body with DirectLink - Distinct contact point - Pinch clamp - Application (DB): Mountain Bike - Brake type: Hydraulic - Blade material: Aluminum - Stamped - Orientation: Right Rear - Pad type (Disc): Steel-backed organic - Bracket (Disc Brake): Direct mount DIR, Intl Std(140mm Rear,160mm Frt rotor) 0IS, Intl Std(160mm Rear,180mm Frt rotor) 20I - Hose length (mm): 1800mm, 950mm - Pistons: 2 - Piston material: Phenolic Plastic - Rotor type recommended: 1-piece G2 CleanSweep - Weight Based On: Direct Mount, 800mm hose, 160mm G2 Rotor (TARGET) - Weight (g): 430

Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.

This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware. - For use with with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed organic pads - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 204 g

This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware. - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Due to the shape of the brake pad installation tabs, this model is not compatible with Centerlock or HSX rotors - Includes steel-backed organic pads - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 204 g

Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker-compatible brake set provides all the power of its siblings, keeping you in complete control.

SRAM's Force CX1 ErgoDynamic levers are descended from the top-end RED, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike. Designed for a 1 x 11 setup, this left-side, brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.

The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight

SRAM's Rival 22 Brake Caliper Set delivers competition-ready speed control, low weight and lovely streamlined aesthetics that will enhance any road bike. Featuring a powerful dual-pivot design and cold-forged-aluminum construction, the Rival brakes offer excellent stopping power. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick-release and adjustment barrel.

With comfortable hoods and lightweight aluminum levers, SRAM's S500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.

Fit for modern times. The updated SRAM Force brakeset pairs mechanical rim braking with our wireless Force eTap AXS group. The dual pivot design also accounts for wider road tires without compromising braking power. - Dual pivot design increases braking power and enhances progressive feel - Wider clearance for modern tires and wheelsets (up to 28c) - Updated finish to match SRAM Force eTap AXS - Includes SwissStop pads: Platinum Flash Pro pad (carbon rims) or BHP pad (aluminum rims) - Pad type: Cartridge - Reach: Standard

- Cold-forged, CNC-machined 6061-T6 aluminum with built-in return spring - Clamp integrates with ODI Lock-On grips - 50g

Box One Genius brake levers are the first ever to incorporate a clamp for ODI Lock-On grips. This ensures that your grips stay put while eliminating the need for an extra clamp. At roughly 50 grams, these cold-forged and CNC-machined levers beat any other on the market. Genius levers have a built-in return spring and are fully compatible with carbon handlebars. The Mid reach lever features a new design that puts it in the same reach position as the Long, but with a more BMX-specific blade for better one-finger leverage. Other features include adjustable reach, a titanium mounting bolt, and stainless steel hardware. Genius levers are designed to work with linear-pull brakes. They are excellent for BMX, mountain, city, urban, and tandem flat-bar bicycles.

The Odyssey Evo 2.5 Brake features a wider space to accommodate larger tires. - Forged from aluminum for strength - More clearance for larger tires - Front or rear brake compatible - Includes all necessary hardware

- Exceptional heat management - Rounded edge - UCI approved for road competition

TRP's two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Its two-piece design is now combined with TRP's new slotted rotor design with a 2.3mm thickness for DHR and E-MTB only. When debris gets trapped between the pad and rotor, braking power is dramatically reduced. This rotor's six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking for more consistent braking power and modulation in mixed conditions. - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

Shimano Ultegra R8010 direct-mount type brake caliper. - Direct mount brake - Direct brake mounts connect directly to the frame to reduce redundant parts and increase overall braking performance - Sleek design - Narrower gap between arms - Wider clearance with larger tire sizes - Compatible with wider 28c tire size - Model Number: BR-R8010-F - Series: Ultegra - Brake Type: Direct mount type - Average Weight: 174 grams

BL-M4100 - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever BR-MT410 - Long-lasting performance and quick - Easy installation and adjustment - Superior modulation gives you the power you need - Quick piston retraction - Lightweight 2-piston disc brake caliper - Pre-assembled and bled brake lever and caliper, with SM-BH59-SS hose & mineral oil - Without rotor and adapter - One-way bleeding system

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.

The SRAM Level brake levels the playing field with power and reliability stuffed into a lightweight package. This is no-nonsense performer, but don’t let its understated disposition fool you—Level gives you the art of braking in minimalist form.

The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight - Includes stainless steel rotor bolts

Shimano XT RT86 6-Bolt Disc Rotor - 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors - Aluminum spider - Includes rotor fixing bolts and non-turn washers - Hub/Disc Compatibility: 6-Bolt Disc - Weight: 173 g - Rotor Size (mm): 203 mm - Rotor Type: Two Piece - Pad Compatibility: All Pad Compounds

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.