Accessories

- Large single compartment - Includes removable shoulder strap - Velcro mounting straps - Bag volume: 280 c.i. - Size: 11x5.5x5.5-inch

- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: Red = lower than 25%, Yellow = 50%-25%, Green = fully charged - No tools bracket - Sold with Avenue R-30 rear taillight - Rear light includes 5 modes - Side illumination ports

For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Wheel Alignment Gauge (also called a dishing tool) is a must. It allows you to easily check centering on road, mountain and BMX wheels from 16 to 29 inches in diameter. It works with any hub width and its innovative design even allows it to be accurately used with the tire still on the wheel. The Wheel Alignment Gauge is a necessity for every wheelbuilder.

PRO X Freehub Grease, using our MRCC Micro Resistant Complex Compounds, is specifically designed for all freehubs that require a very lightweight grease. Non-pawl freehubs recommend a grease to stay in the mechanisms moving parts. Oils generally are to thin and will move away from moving parts leaving them exposed to wear and malfunction due to lack of lubrication. PRO X Freehub Grease performs in a broad temperature range from the summer heat to the extreme cold temperatures. "Pour Point" of PRO X Freehub Grease is -30F / -34C degrees. PRO X Freehub Grease works exceptional in hubs that share lubrication between the freehub and wheel bearings. Follow the manufacturer's specification for the volume required in your freehub body to experience the superior performance of Dumonde Tech's PRO X Freehub Grease. Our MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Tech Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for our Motorsports lubrication, MRCC, is incorporated into our revolutionary PRO X bicycle lubricants. Everyone who has tested or raced using PRO X reports that its performance is significantly better than any other lube they have ever used. Benefits: - Performs in cold conditions. Ideal for Snow Bikes - Reduces resistance - Reduces watts used. - No shipping restrictions, can be sent anywhere in the world by air or ground. - No VOC's.

Standard bleed kit for mineral oil brakes - Includes 2 syringes/2 M4 fittings, bleed block, Torx tool, crowfoot - SRAM Model ID: DB-SPP-A0

Kryptonite's KryptoLok Series 2 955 Mini Integrated Chain is a 9mm-thick, four-sided link chain made of triple-heat-treated manganese steel for serious strength. Its integrated high-security lock cylinder is pick, drill, and cut resistant. This 21.5-inch chain is covered with a weather-resistant nylon sleeve that protects your bike's finish. Plus, the KryptoLok Series 2 has an anti-theft protection offer.

Constantly improving. Kryptonite's New-U generation of U-Locks features a patent-pending double deadbolt design, anti-rotation capability, sliding dust covers, and an updated, modern design. The KryptoLok has a security rating of 6/10 making it a great choice for quick urban stops or longer suburban stops. Specifications & Features: - 6/10 security rating - 12.7mm hardened PERFORMANCE STEEL SHACKLE - Patent-pending HARDENED DOUBLE DEADBOLT DESIGN gives additional protection against twist attacks - HIGH SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes 2 STAINLESS STEEL KEYS, with ergonomic design to reduce the amount of torque, and keep them from bending or breaking - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - Key Safe Program - Product dimensions: 3.25” x 7” (8.2cm x 17.8cm) - Product weight: 2.5 lbs (1.13 kgs)

- 12.7mm hardened high-grade performance alloy steel shackle resists hand tools - New hardened double deadbolt engages both shackle-ends increasing holding power - Patented new "pass-thru" crossbar design includes anti-rotation features providing advanced protection against twist and single cut attacks - Includes FlexFrame-U bracket providing convenient multi-location u-lock transport - Includes 2 stainless steel keys with an ergonomic design to reduce torque and keep them from bending or breaking - New sliding dustcover - Reinforced hardened crossbar design provides more protection for the lock internals - Key Safe Program - Product dimensions: 3.25” x 7” (8.2cm x 17.8cm) - Product weight: 2.5 lbs (1.13 kgs)

Securely holds the TS-4 Professional Wheel Truing Stand and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.

Keep your most commonly used tools close at hand with this clever, multi-function tool holder. The TK-4 was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas. The Tool Kaddie rotates for easy access and is molded from a durable composite material. - Stand Mount mounts to any Park Tool Professional Shop Stand (all versions of PRS-2, -3, -4, and -33) - Specific slots and holders for 3-way hexes, screwdrivers, P-Handles, pliers/cutters - Generic slots and holders to hold a wide variety of tools and small parts - Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately) - Built-in receiver port for PTH-1 Paper Towel Holder (sold separately)

- Independently adjustable arms hold 2 bikes - Rack requires no wall attachment - Durable grey powder-coat finish - Easy to assemble, tools included - Max load 66lbs (84" X 22" x 14")

FUNCTIONAL. FASHIONABLE. FENDERS. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. PRODUCT DETAILS - Original replacement fenders for Electra Townie bikes - Color matched for direct compatibility

Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. Fenders intended for warranty and service use. - Original replacement fenders for Electra Townie bikes - Color matched for direct compatibility

- Pure Cycles light set perfect for entry-level riders and commuters - Features a 300 lumen headlight with 5 modes and a super bright rear COB LED light - Compact design saves precious handlebar and seatpost space - Silicone rubber strap mounting makes installation and removal quick and easy - Both lights are USB rechargeable, charging cable included

A useful standalone pack for daily riding or as part of a larger bikepacking setup, the Expedition Top Tube Pack is a lightweight, secure storage space that’s ideal for stashing frequently used items on the road. The Expedition Top Tube Pack is equipped with an innovative waterproof slider. While it looks like a normal zip, it’s better — it’s fully waterproof. However, it does need a little more care than a regular zipper, as excess strain can cause the rails to detach from the sliding mechanism. In particular, it’s important to not over-pack your Top Tube Pack. Materials The Expedition Top Tube Pack is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing.

A clever, compact mini pump with hidden hose, pressure gauge, and concealed CO2 inflator. Designed with a chamber for higher-pressure tires, Air Rush Pro Mini Pump is a premium option for quick and easy manual inflation up to 100 psi—or use the included inflator found tucked inside the handle for effortless CO2 inflation. While not in use, Air Rush Pro stows easily in a jersey pocket or mounts cleanly under a water bottle cage with the included bracket. Product details - Two-in-one design combines CO2 inflator and mini pump - Flexible rubber hose quickly connects to pump body with magnetic attachment - Hose can be concealed inside pump when not in use - Pump head securely threads onto Presta and Schrader valves - Presta-compatible CO2 inflator securely stored in threaded handle - Folding handle locks into place to add comfort while inflating - Use included bracket for clean mounting that easily fits under bottle cage

The QTH-1 is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on bicycles. The magnetic "quick-change" handle allows for one-handed operation and makes changing bits quick and easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use and is fully rebuildable. Includes the following magnetic 1/4" bits: - 2mm, 2.5mm, 3mm, 4mm, 5mm & 6mm hex - T25 Torx-compatible - #2 Philips cross tip - Bit holder includes empty spaces for 2 extra bits

Be ready to ride at a moment's notice with plenty of space for MTB essentials on rides lasting two hours or less. Always be prepared For off-road riders who give up seat packs for dropper posts, Rapid Pack is perfect for mountain bike rides lasting two hours or less. Designed with a sleek aesthetic that makes you feel like you aren't wearing your uncle's fanny pack, this bag holds all your essentials when cargo pockets are being used and hydration packs are overkill. Product details - Lightweight stretch woven material is durable and works with the body's natural movements - Ridged foam back panel for breathability and comfort - Two zippered security pockets hold essentials - Left-side opening features internal mesh pockets for easy gear organization - Middle waterbottle pocket centralizes weight while riding - Right-side opening features internal mesh pockets with compression phone sleeve and key fob - Fits most tubes including fat bike and plus sized models

Out-front computer mount for Wahoo Element computers. This is the next generation of industry-leading Wahoo Computer Mounts – stronger, easier, more versatile, and more stylish design to compliment your Wahoo and your bike. The ultimate upgrade for your Wahoo computer. The advanced co-polymer Wahoo insert locks your computer in place with strength and security. Designed and tested extensively so that our replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Combo Compatible – versions available that support GoPro style interface action cameras and lights. All cameras utilizing a GoPro interface, GoPro HERO series, GoPro Sessions’ series Cameras. - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. *Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. K-EDGE Combo Mount are NOT DESIGNED to hold a Cycliq Fly 12. (Cycliq Fly 12 users should choose the K-EDGE K13-410, K13-420, K13-2450 GO BIG camera/light mounts.) K-EDGE mounts co-polymer plastic computer inserts are designed to hold the corresponding computer ONLY (Garmin- black, WAHOO- blue, SIGMA – red), and breakaway in a crash to protect the computer body. K-EDGE Combo Mounts are designed to hold Garmin, WAHOO and SIGMA cycling computers and Go Pro, Shimano, Garmin VIRB X sized cameras and standard sized cycling lights (Light and Motion Urban or Niterider). Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.

Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ASR safety system - Bottom bracket cutouts - Made in Germany - Tire width in inches: 0.8"-1.1" - Tire width in mm: 20-28mm - Front mudguard length: 680mm - Rear mudguard length: 1185mm

Learning to ride safely is easy with Sunlite's Training Wheels. These wheels roll smoothly thanks to their heavy-duty steel construction with hard rubber tires. They fit bicycles with wheel sizes of 20 to 26 inches, and the height adjusts as the rider learns balance.

- Made from heat-treated S2 tool steel to ensure the ultimate in strength and lasting performance. - Ergonomic, soft-plastic, TPR handle for comfort, leverage, and easy handling. - Includes: T7, T10, T15, T20, T25, T30, and T40 wrenches. The torx style fastener is quickly becoming standard fare on the modern bicycle. Having the right torx wrenches in the right sizes is essential for the modern mechanic. Pedro's Pro T/L Torx Wrench Set is up to the challenge and offers features you won't find anywhere else. We started by choosing heat-treated S2 tool steel to ensure the ultimate in strength and lasting performance. We then added extra length to each leg of the wrench offering better leverage and easy access to hard-to-reach bolts. Finally we finished off by over molding the wrenches with an ergonomic, soft plastic, TPR handle that fits in your hand like a glove providing the ultimate in grip and comfort. The set includes T7, T10, T15, T20, T25, T30, and T40 sizes all backed by Pedro's lifetime warranty.

A floor pump is one of the best investments a rider can make to keep their bike ready for action. Experts agree that tire pressure affects ride quality more than any fancy frame material, the latest suspension, or high-tech wheels. In addition to ride quality, tire pressure affects traction for cornering and stopping, rolling efficiency, power transfer, flat prevention, and overall safety. A floor pump will make inflating your tires easier, faster, and more accurate when compared to a small hand pump, compressor, or other inflating device. Pedro's latest version of the Super Prestige improves upon its own legacy as a favorite among top mechanics and includes features demanded by the best. These features include high quality alloy steel construction for durability, an automatic head design that instantly adapts to either Presta/Schrader tube valve types with an integrated bleed valve for quickly setting exact pressures, an integrated top-mounted dial pressure gauge, comfortable ergonomic soft-grip handle, and heavy-duty alloy steel base for stability. The Super Prestige is designed with a long-stroke, narrow-barrel design to quickly inflate tires, but with less effort, up to 160PSI (8 Bar) maximum pressure. - Professional quality floor pump designed with performance and value in mind - Features automatic Presta/Schrader head with integrated bleed valve, integrated top-mounted dial pressure gauge and ergonomic soft-grip handle - Long-stroke, narrow-barrel design quickly inflates with less effort up to 160PSI (8 Bar) maximum pressure

An absolute masterpiece, this cage screams style. The Fly Cage Carbon’s clean lines and hand-painted edges really stand out. No cage outperforms the Fly Cage Carbon with LockTight wings, which hold bottles securely while keeping them accessible. - 100% 3k Carbon - LockTight Wings - Hand-painted - Road and MTB approved - High-end and durable

- End link locking point for extensive holding power - 4-sided 3t manganese steel chain links - 4 digit resettable combination over 10,000 codes - Patent pending lock head design - Combo Safe Program - Product dimensions: Length 120cm - Product weight: 4.50 lbs

Securely holds any of Park's TS-2, TS-2.2, and TS-2.2P Professional Wheel Truing Stands and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.

Securely holds the TS-4.2 Professional Wheel Truing Stand and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.

This basket is as sweet as honey. It's perfect for holding all your things, large and small. Easily attach and remove this MIK basket from your rear rack for added functionality and fun. You have things. We have things to hold those things. - Compatible with MIK rear racks / MIK adapter plate installed - Proprietary Electra design - Honeycomb patterned stamp - Powder-coated steel - Carries up to 9kg (20lb) - Dimensions: 34cm (l) x 23cm (w) x 27.5cm (h) - Attachment: MIK - Includes hardware: Yes - Weight: 1.02kg

Many bicycles will not shift or track properly because the front and rear wheels are not in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop outs of the frame may be misaligned. For years the accepted method to check the alignment of the rear drop-out was to run a string on either side. This method does work to some extent. However, it is not accurate because the measurement is not taken at the drop-out. With the Park Tool Frame Alignment Gauge, the alignment can be checked quickly and accurately at the drop-out. It includes a retractable pointer to fit all sizes and types of bicycles.

Constantly improving. Kryptonite's New-U generation of U-Locks features a patent-pending double deadbolt design, anti-rotation capability, sliding dust covers, and an updated, modern design. The KryptoLok has a security rating of 6/10 making it a great choice for quick urban stops or longer suburban stops. Specifications & Features: - 12.7mm hardened PERFORMANCE STEEL SHACKLE - New Patent-pending HARDENED DOUBLE DEADBOLT DESIGN gives additional protection against twist attacks - HIGH SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes 2 STAINLESS STEEL KEYS, with ergonomic design to reduce the amount of torque, and keep them from bending or breaking - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - Key Safe Program - Product dimensions: 4” x 9” (10.2cm x 22.9cm) - Product weight: 2.9 lbs (1.32 kgs)